 |
KAC-64044/3/2 Channel Power Amplifier
| Adding an amplifier like the KAC-6404 can bring new life to any audio system. This 4-channel amplifier will dramatically improve sound quality with 500 watts of power and features like MOSFET switching and built-in variable low-pass and high-pass filters. | |
| General Features | |
| • | 500 Watts Maximum Output Power |
| • | CEA Rated: 40W x 4 (1.0% THD+N) (4Ohm) |
| • | 60 Watts x 4 (2 Ohm) |
| • | 130 Watts x 2 (4 Ohm Bridged) |
| • | MOSFET power supply |
| • | Preamp and speaker-level inputs |
| • | Fuse rating: 25A x 1 |
| • | 13-3/4"W x 2-3/8"H x 9-1/8"D |
| Specifications | |
| Amplifier Type | Class-AB |
| Band Reject Filter | - |
| Band Reject Filter Frequency | - |
| Bass Boost Circuit | - |
| Bass Boost Frequency | -Hz |
| Channel Design | 4-Channel |
| Cooling System | - |
| Current Consumption | 19A |
| Delay Control | - |
| Frequency BAND 1 (Front, Rear) | - |
| Frequency BAND 2 (Front, Rear) | - |
| Frequency BAND 3 (Front, Rear) | - |
| Frequency BAND 4 (Front, Rear) | - |
| Frequency BAND 5 (Front, Rear) | - |
| Frequency Response | 5K - 50Hz |
| Gain (Boost or Cut) | - |
| High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range50-200Hz (Variable) High Range50-200Hz (Variable) |
| Infrasonic Filter | Hz, Hz, -12dB/oct |
| Input Impedance | 10  |
| Inputs | 2 x RCA & High-Level |
| Installation Size (W x H x D) | 13" x 2-5/16" x 9-1/16" 330 mm x 59 mm x 230 mm |
| Installer Memory |  |
| LED Information Display | Voltage, Current, Temperature |
| Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range80--Hz (Variable) High Range80--Hz (Variable) |
| Maximum Output Power | 500 Watts |
| Operating Voltage | 14.4 V (11 - 16 V Allowable) |
| Output | 1-channel RCA |
| Phase Inverter | - |
| Power Supply | Single Power Supply |
| Power Wire Gauge | 4-Gauge |
| Protection Circuit | Yes |
| Quality Factor BAND 1 - BAND 3 | - |
| Quality Factor BAND 4 - BAND 5 | - |
| Rated Output Power | Rated Power Output(12.0V) 4Ω -W x - 2Ω -W x - Bridged4Ω -W x - 1Ω -W x - Rated Power Output(14.0V) 4Ω 40W x 4 2Ω 60W x 4 Bridged 4Ω 130W x 2 1Ω -W x - |
| Remote Bass Control | - |
| Sensitivity | 0.2V - 5.0V |
| Signal-to-Noise Ratio | 94dB 80dBA (Ref: 1 Watt into 4 ) |
| WARRANTY | 1 - Year Parts & Labor |
| Weight | 5.9 lbs (2.7 kg) |
| RMS Watts Per Channel @ 4 Ohms, 1% THD+N | 40W x 4 |