 |
KAC-8104DClass D Mono Power Amplifier
| The KAC-8104D Class D Mono Power Amplifier has a small foot print and a mighty powerful kick. Ready to pump out 1000 Watts Max Power, the KAC-8104D includes a built-in infrasonic filter that helps subwoofers perform their best by sharply cutting off inaudible frequencies below 15 or 25 Hz. | |
| General Features | |
| • | 1000 Watts of Power with 30% Smaller Chassis Size |
| • | CEA Rated: 300W (1.0% THD+N) (4Ohm/1Ch) |
| • | CEA Rated: 500W (1.0% THD+N) (2Ohm/1Ch) |
| • | High Quality Speaker Level Input and Blue Illumination |
| • | Variable low-pass filter (50-200 Hz at -24 dB per octave) |
| • | Bass Boost Control 0-18 dB at 40 Hz) |
| • | Subsonic filter (15/25 Hz, 18 dB/octave) |
| • | Speaker-level inputs with signal sensing turn-on |
| • | Preamp-level inputs and outputs |
| • | Fuse rating: 40A x 1 |
| • | 11-1/16"W x 2-3/8"H x 9-7/8"D |
| Specifications | |
| Amplifier Type | Class-D |
| Band Reject Filter | - |
| Band Reject Filter Frequency | - |
| Bass Boost Circuit | - 18 dB (Variable) |
| Bass Boost Frequency | 40Hz |
| Channel Design | Mono |
| Cooling System | Silent Fans |
| Current Consumption | 40A |
| Delay Control | - |
| Frequency BAND 1 (Front, Rear) | - |
| Frequency BAND 2 (Front, Rear) | - |
| Frequency BAND 3 (Front, Rear) | - |
| Frequency BAND 4 (Front, Rear) | - |
| Frequency BAND 5 (Front, Rear) | - |
| Frequency Response | 5K - 200Hz |
| Gain (Boost or Cut) | - |
| High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range---Hz (Variable) High Range---Hz (Variable) |
| Infrasonic Filter | Hz, Hz, -12dB/oct |
| Input Impedance | 10  |
| Installation Size (W x H x D) | 11" x 2-5/16" x 9-3/8" 280 mm x 59 mm x 238 mm |
| Installer Memory | ¨ |
| LED Information Display | Voltage, Current, Temperature |
| Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range50-200Hz (Variable) High Range50-200Hz (Variable) |
| Maximum Output Power | Watts |
| Operating Voltage | 1000V DC |
| Output | 1-channel RCA |
| Phase Inverter | ° (Normal) / -180° (Reverse) |
| Power Supply | Single Power Supply |
| Power Wire Gauge | 4-Gauge |
| Protection Circuit | Yes |
| Quality Factor BAND 1 - BAND 3 | - |
| Quality Factor BAND 4 - BAND 5 | - |
| Rated Output Power | Rated Power Output(12.0V) 4Ω -W x - 2Ω -W x - Bridged4Ω -W x - 1Ω -W x - Rated Power Output(14.0V) 4Ω 300W x 1 2Ω 500W x 1 Bridged 4Ω -W x - 1Ω -W x - |
| Remote Bass Control | - |
| RMS Watts Per Channel @ 4 Ohms, 1% THD+N | 300W x 1 |
| Sensitivity | 0.2V - 5.0V |
| Signal Sensing Turn On | Yes |
| Signal-to-Noise Ratio | 100dB 85dBA (Ref: 1 Watt into 4 ) |
| Speaker Wire Gauge | 12-Gauge |
| Terminal Layout | One-Sided |
| WARRANTY | 1 - Year Parts & Labor |
| Weight | 5.9 lbs (2.7 kg) |