 |
X600FFour-Channel Power Amplifier
| The Japanese kanji characters symbolize “powerfulness”. It is a character that stands for rigidity and strength. The X600F delivers clear, balanced musical reproduction thanks to Kenwood's exclusive K-STAT output transistors which are specially designed for music playback. | |
| General Features | |
| • | Powerful Amplifier Series |
| • | Class AB 4-Ch Amplifier |
| • | K-STAT Output Circuit |
| • | Detachable Aluminum Dress Plate |
| • | Power MOS-FET Switching Power Supply |
| • | Cast Aluminum Heat Sink Design |
| • | Dual Cooling Fans |
| • | Hexagon Screw Type Terminal Blocks |
| • | Single-Side Exposure Of Terminals For Multi-Installation |
| • | Line Output Terminals For Extension |
| • | CEA-2006 Compliant |
| • | 2-Year Warranty |
| Power MOSFET | |
| In the power stage, MOSFETs, (metal oxide semiconductor field effect transistors) are arranged in a 2-parallel push-pull configuration. The resulting increase in driver control enables driving high or low impedance loads with ease. Better Sound Quality & Higher Output! | |
| K-STAT™ Self-Tracking Audio transistor | |
| Many amplifiers have higher distortion when they first power up as it takes time for the amp to reach optimal operating temperature. K-STAT™ is a specialized audio technology developed by Kenwood that uses a transistor with a built-in biasing circuit to ensure the amplifier adjusts accordingly based on any change in temperature. This new design results in lower distortion so when the amp powers up, and at full power, distortion is reduced. It also reduces thermal resistance but increases power for improved sound quality. | |
| Variable High Pass Filter | |
| The built-in variable HPF makes it possible to select the crossover frequency and remove low frequencies from component or coaxial speakers. | |
| Variable Low Pass Filter | |
| The built-in variable LPF allows the user to select a variable frequency and remove damaging high frequencies from the subwoofer pathway for more bass output with less distortion. | |
| Specifications | |
| RATED OUTPUT POWER (14.4V): | |
| • | 100W RMS x 4 @ 4Ω |
| • | (20Hz-20kHz @ 0.05%THD) |
| • | 150W RMS x 4 @ 2Ω |
| • | (1kHz @ 0.5% THD) |
| • | 300W RMS x 2 @ 2Ω (Bridged) |
| • | (1kHz @ 0.5% THD) |
| • | RMS POWER OUTPUT (CEA-2006) |
| • | 100W RMS x 4 |
| • | (RMS @ 4Ω, 1% THD+N) |
| • | 85dBa Signal-To-Noise Ratio |
| BUILT-IN CROSSOVER CONTROL: | |
| • | Variable High-Pass Filter: 50Hz-200Hz (-12dB/oct) |
| • | Variable Low-Pass Filter: 50Hz-200Hz (-12dB/oct) |
| TERMINALS: | |
| • | Battery: Hex Type (4 AWG) |
| • | Ground: Hex Type (4 AWG) |
| • | Speaker: Hex Type (8 AWG) |
| • | Operating Voltage: 14.4V |
| • | Current Consumption: 64A |
| • | S/N Ratio: 105dB |
| • | Frequency Response: 5Hz-50kHz |
| • | Input Sensitivity: 0.2V ~ 5.0V |
| Installation Size: | |
| • | Width: 14-15/16” (380mm) |
| • | Height: 2-5/8” (66mm) |
| • | Depth: 11-1/4” (286mm) |
| • | Weight: 10.8 lbs. (4.9Kg) |
| Specifications | |
| Maximum Output Power | 800 Watts |
| RMS Power Output | 70 Watts × 4 (1%THD+N) (4Ω) |
| Signal-to-Noise Ratio | 105dB 83dBA (Ref: 1 Watt into 4  ) |
| Amplifier Type | Class-AB |
| Band Reject Filter | - |
| Band Reject Filter Frequency | - |
| Bass Boost Circuit | - 18 dB (Variable) |
| Bass Boost Frequency | 40 - 100 Hz(Variable) |
| Channel Design | 4-Channel |
| Cooling System | Silent Fans |
| Current Consumption | 47A |
| Delay Control | - |
| Frequency BAND 1 (Front, Rear) | - |
| Frequency BAND 2 (Front, Rear) | - |
| Frequency BAND 3 (Front, Rear) | - |
| Frequency BAND 4 (Front, Rear) | - |
| Frequency BAND 5 (Front, Rear) | - |
| Frequency Response | 5K - 70Hz |
| Gain (Boost or Cut) | - |
| High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range40-200Hz (Variable) High Range40-200Hz (Variable) |
| Input Impedance | 10k |
| Inputs | 2 x RCA |
| Installation Size (W x H x D) | 14-15/16" x 2-9/16" x 11-1/4" 380 mm x 65 mm x 286 mm |
| Internal Memory | - |
| LED Information Display | Voltage, Current, Temperature |
| Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range40-200Hz (Variable) High Range40-200Hz (Variable) |
| Operating Voltage | 14.4 V (11 - 16 V Allowable) |
| Output | 1-channel RCA |
| Phase Inverter | - |
| Power Supply | Single Power Supply |
| Power Wire Gauge | 4-Gauge |
| Quality Factor BAND 1 - BAND 3 | - |
| Quality Factor BAND 4 - BAND 5 | - |
| Rated Output Power | Rated Power Output(12.0V) 4Ω 45W x 4 2Ω 65W x 4 Bridged4Ω 120W x 2 1Ω -W x - Rated Power Output(14.0V) 4Ω 70W x 4 2Ω 100W x 4 Bridged 4Ω 200W x 2 1Ω -W x - |
| Remote Bass Control | - |
| Sensitivity | 0.2V - 5.0V |
| Speaker Wire Gauge | 12-Gauge |
| Terminal Layout | One-Sided |
| Weight | 10.1 lbs (4.6 kg) |
| Installer Memory | ¨ |
| Protection Circuit | Yes |
| Signal Sensing Turn On | No |
| WARRANTY | 2 - Year Parts & Labor |